Eucerin Hyaluron Filler + Elasticity Day Serum 30ml

DESCRIPTION

What It Does: Alcohol denat. dissolves oil-soluble and water-soluble cosmetic actives, provides rapid antimicrobial activity at concentrations above 60–70% by denaturing microbial proteins, delivers a refreshing cooling sensation through evaporative cooling on skin, and temporarily enhances the penetration of topical actives by transiently disrupting the stratum corneum lipid bilayer organisation.

Why It's Used: Formulators choose alcohol denat. for its irreplaceable combination of solvent power, antimicrobial activity, and penetration-enhancing properties. no other cosmetic solvent simultaneously provides the cooling sensory experience of alcohol (from evaporative cooling at the skin surface), the immediate antimicrobial activity required for sanitisers (from protein denaturation above 60%), and the transient sc lipid disruption that improves active ingredient delivery (essential in actives-rich toners and essences). for denatured alcohol specifically, denaturing agents (typically 5% isopropanol or bitrex) prevent consumption without affecting cosmetic function.

How It Works: Alcohol denat. works through multiple mechanisms depending on concentration: (1) solvent action — alcohol's hydroxyl group provides hydrogen bonding with water while the short alkyl chain provides interaction with organic solutes, enabling dissolution of both hydrophilic and moderately lipophilic cosmetic actives in a single solvent; (2) antimicrobial — above 60% concentration, ethanol denatures microbial proteins by disrupting non-covalent bonds maintaining protein secondary and tertiary structure — the alcohol molecules intercalate between protein chains, disrupting the hydrophobic interactions and hydrogen bonds that maintain enzyme active site geometry. this non-specific protein denaturation is immediately bactericidal and virucidal with no resistance mechanism possible; (3) sc penetration enhancement — at lower concentrations (5–30%), ethanol transiently fluidises the sc lipid bilayer by intercalating between the ordered lipid lamellae, disrupting the crystal packing and increasing lipid bilayer fluidity. this transient fluidisation increases the diffusion coefficient of co-applied actives through the sc for up to 30 minutes post-application; (4) astringency — alcohol's protein precipitating action at the skin surface contracts superficial proteins, temporarily tightening pores and reducing oiliness.

Typically Found In: Toners,hand sanitisers,actives serums

TECHNICAL DETAILS

Primary Category: Active ingredient – cosmetic active

Secondary Functions: Skin conditioning

Application Areas:

Facial Skincare

Body Care

Hair Care

Beard Care

Color Cosmetics (Makeup)

Dietary/Oral Supplements

Typical Concentration Range: 5%–95%

SOURCING & ETHICS

Vegan Status: Yes

Halal Status: Yes

Source Notes: Commercially produced for cosmetic use. verify vegan/halal status with supplier.

SKIN COMPATIBILITY

Irritancy Rating: 1/5 – very low

Comedogenicity Rating: 0/5 – non-comedogenic

Sensitivity Concerns: Well-tolerated by most skin types.

Safe for Sensitive Skin: Yes

SAFETY & COMPATIBILITY

Safety Profile: Good safety profile at recommended concentrations. ewg score: 1–2.

Works Well With: Standard skincare actives

Avoid Combining With: No known significant incompatibilities

SCIENTIFIC NOTE

Ethanol concentration-dependent antimicrobial efficacy: below 40% — minimal bactericidal effect (insufficient protein denaturation); 40–60% — bacteriostatic, not bactericidal; 60–70% — peak bactericidal efficacy against both enveloped and non-enveloped viruses and vegetative bacteria (optimal water content maintains protein hydration required for denaturation to proceed); 80–90% — remains effective but slightly reduced from decreased water activity; 95–100% — reduced efficacy (insufficient water for protein denaturation). the 70% 'sweet spot' for sanitisers reflects this concentration-efficacy peak, not a formulation convenience.

Last Verified: Cosing database,alcohol denat. ethanol solvent antimicrobial review

Primary Sources: 2026-03-12

DESCRIPTION

What It Does: Provides antioxidant protection, soothing anti-inflammatory effects, and skin-conditioning benefits through plant-derived polyphenols and phytochemicals.

Why It's Used: Plant extracts concentrate bioactive phytochemicals evolved for environmental protection — uv, microbial, and oxidative stressors — that translate to skin benefits.

How It Works: Polyphenols (flavonoids, phenolic acids) inhibit nf-κb-mediated inflammatory signaling, scavenge reactive oxygen species through electron donation, and chelate pro-oxidant metal ions to reduce oxidative skin damage.

Typically Found In: Serums,toners,moisturizers,masks,essences

TECHNICAL DETAILS

Primary Category: Botanical extracts

Secondary Functions: Antioxidant,anti-inflammatory

Application Areas:

Facial Skincare

Body Care

Hair Care

Beard Care

Color Cosmetics (Makeup)

Dietary/Oral Supplements

Typical Concentration Range: 0.1–10%

SOURCING & ETHICS

Vegan Status: Yes

Halal Status: Yes

Source Notes: Plant-derived extract; no animal components.

SKIN COMPATIBILITY

Irritancy Rating: 1

Comedogenicity Rating: 0

Sensitivity Concerns: Low sensitization potential at recommended use concentrations.

Safe for Sensitive Skin: Yes

SAFETY & COMPATIBILITY

Safety Profile: Well-characterized cosmetic ingredient with established safety profile. generally non-irritating at typical use concentrations. suitable for leave-on and rinse-off cosmetics.

Works Well With: Niacinamide,hyaluronic acid,vitamin c,ceramides

Avoid Combining With: Strong oxidizing agents

SCIENTIFIC NOTE

Plant secondary metabolites (flavonoids, terpenes, phenolic acids) are biosynthesized as defense compounds against uv, herbivores, and pathogens. their anti-inflammatory activity typically derives from competitive inhibition of cox-2 and 5-lox enzymes (ic50 1–50 µm), while antioxidant activity involves single electron transfer (set) and hydrogen atom transfer (hat) mechanisms with structure-dependent rate constants.

Last Verified: Cosing eu database; pcpc cosmetic ingredient safety reviews; phytochemical and ethnobotanical literature

Primary Sources: 2025-01-15

DESCRIPTION

What It Does: Absorbs uv radiation at specific wavelengths (uva 320–400 nm, uvb 290–320 nm) and dissipates photon energy as heat rather than skin-damaging photochemical reactions.

Why It's Used: Organic uv filters are chosen for their high molar extinction coefficient, specific spectral coverage, and formulation compatibility — individual filters are combined to provide broad-spectrum coverage across uva+uvb.

How It Works: Uv photon absorption by the aromatic chromophore π-system excites the molecule from s₀ ground state to s₁ excited state. rapid internal conversion or photoisomerisation dissipates energy as vibrational heat before it can initiate skin photodamage.

Typically Found In: Sunscreens,photoprotective products

TECHNICAL DETAILS

Primary Category: Active ingredient – cosmetic active

Secondary Functions: Skin conditioning

Application Areas:

Facial Skincare

Body Care

Hair Care

Beard Care

Color Cosmetics (Makeup)

Dietary/Oral Supplements

Typical Concentration Range: Check local sunscreen regulations

SOURCING & ETHICS

Vegan Status: Yes

Halal Status: Yes

Source Notes: Commercially produced for cosmetic use. verify vegan/halal status with supplier.

SKIN COMPATIBILITY

Irritancy Rating: 1/5 – very low

Comedogenicity Rating: 0/5 – non-comedogenic

Sensitivity Concerns: Well-tolerated by most skin types.

Safe for Sensitive Skin: Yes

SAFETY & COMPATIBILITY

Safety Profile: Good safety profile at recommended concentrations. ewg score: 1–2.

Works Well With: Standard skincare actives

Avoid Combining With: No known significant incompatibilities

SCIENTIFIC NOTE

Organic uv filters require photostabilisation (by avobenzone-octocrylene pairing, or triazine stabilisers) as some absorbers degrade on uv exposure — formulator must verify photostability of the chosen filter combination.

Last Verified: Cosing database,butyl methoxydibenzoylmethane organic uv filter review

Primary Sources: 2026-03-12

DESCRIPTION

What It Does: Provides light silky emolliency combining isononanoate lightness with cetearyl conditioning.

Why It's Used: Light conditioning ester — uniquely combines the lightness of branched-acid esters with the skin conditioning of fatty alcohol esters in one ingredient, providing both feel attributes simultaneously.

How It Works: Cetearyl alcohol (c16+c18) + isononanoic acid (3,5,5-trimethylhexanoic) ester. light feel: branched acid. conditioning: cetearyl component. non-greasy. cosmos accepted. crodamol sts: commercial reference.

Typically Found In: Light emollient serums,skin care,body lotion

TECHNICAL DETAILS

Primary Category: Functional ingredient – emollient

Secondary Functions: Barrier sealing,softening

Application Areas:

Facial Skincare

Body Care

Hair Care

Beard Care

Color Cosmetics (Makeup)

Dietary/Oral Supplements

Typical Concentration Range: 1%–20%

SOURCING & ETHICS

Vegan Status: Yes

Halal Status: Yes

Source Notes: Plant-derived, synthetic or animal-derived. verify source.

SKIN COMPATIBILITY

Irritancy Rating: 1/5 – very low

Comedogenicity Rating: 1/5 – low; formulation-dependent

Sensitivity Concerns: Non-irritating.

Safe for Sensitive Skin: Yes

SAFETY & COMPATIBILITY

Safety Profile: Excellent safety profile. ewg score: 1.

Works Well With: Humectants,ceramides,actives as carrier

Avoid Combining With: No significant incompatibilities

SCIENTIFIC NOTE

Cetearyl isononanoate's dual feel profile from two molecular components: isononanoate acid branching provides lightness (prevents ordered surface film); cetearyl alcohol provides conditioning (long-chain skin interaction). same ester linkage delivering both properties — emollient design combining complementary components.

Last Verified: Cosing database,crodamol sts technical literature

Primary Sources: 2026-03-12

DESCRIPTION

What It Does: Provides silicone-characteristic silky feel and skin protection with adjustable viscosity.

Why It's Used: The benchmark cosmetic silicone – sets the gold standard for silky application feel, spreadability, and skin protection in virtually all skin care categories.

How It Works: Polydimethylsiloxane chain flexibility provides extremely low surface tension and high spreadability. inert si-o backbone provides chemical stability and excellent skin tolerance. occlusive film formation reduces tewl. higher viscosity grades provide more intense conditioning.

Typically Found In: Moisturizers,foundations,primers,sunscreens – nearly universal

TECHNICAL DETAILS

Primary Category: Functional ingredient – polydimethylsiloxane

Secondary Functions: Barrier sealing,softening

Application Areas:

Facial Skincare

Body Care

Hair Care

Beard Care

Color Cosmetics (Makeup)

Dietary/Oral Supplements

Typical Concentration Range: 0.1%–30%

SOURCING & ETHICS

Vegan Status: Yes – synthetic

Halal Status: Yes

Source Notes: Plant-derived, synthetic or animal-derived. verify source.

SKIN COMPATIBILITY

Irritancy Rating: 1/5 – very low

Comedogenicity Rating: 1/5 – low; formulation-dependent

Sensitivity Concerns: Non-irritating.

Safe for Sensitive Skin: Yes

SAFETY & COMPATIBILITY

Safety Profile: Excellent safety profile. ewg score: 1.

Works Well With: Humectants,ceramides,actives as carrier

Avoid Combining With: No significant incompatibilities

SCIENTIFIC NOTE

Dimethicone's exceptional silky feel arises from its very low intermolecular attractive forces (weak van der waals forces due to non-polar methyl groups) that allow silicone chains to slide freely over skin. the coefficient of kinetic friction for pdms against skin (~0.04) is among the lowest of any cosmetic material – explaining why even small amounts transform product feel.

Last Verified: Cosing database,cir safety assessment

Primary Sources: 2026-03-12

DESCRIPTION

What It Does: Distarch phosphate absorbs surface sebum and cosmetic oils through its porous granule structure, provides a silky soft-focus powdery finish on skin from the biopolymer particle's low friction coefficient, forms a breathable protective film on skin and hair, and acts as an excipient carrier or encapsulation matrix for actives in powder formulations.

Why It's Used: Formulators choose distarch phosphate as a biodegradable, renewable alternative to synthetic polymers (ptfe, nylon, polyethylene) in powder cosmetics — providing equivalent or superior absorbency and skin feel without microplastic regulatory concerns under eu regulation 2023/2055. natural starch granules have an intrinsically soft, semi-crystalline structure (mohs hardness ~1) that spreads smoothly on skin without abrasion, making them preferred over silica or talc when maximum gentleness is required. modified versions (cross-linked, esterified) extend the range of performance from pure powder through gel-forming to film-forming applications.

How It Works: Distarch phosphate works through the physical properties of its semicrystalline polysaccharide granule architecture: (1) oil absorption — starch granules are semicrystalline spheres (amylose crystalline domains surrounded by amorphous amylopectin matrix) with a porous surface and internal channels. surface sebum and oil penetrate the granule via capillary action into these channels and are immobilised by van der waals forces with the polysaccharide chains — providing oil-mattifying at the skin surface; (2) soft-focus texture — granule diameter (5–50 μm, depending on source) and smooth spherical morphology provide low-friction glide between skin surface and the applying finger/brush, with the semicrystalline granule structure being soft enough to deform without sharp edges; (3) film formation — when wetted, starch granules gelatinise (crystalline structure melts to amorphous hydrogel) above 60°c during processing, cooling to form a continuous film. modified starches with crosslinks maintain film integrity without complete gelatinisation; (4) biodegradation — amylase enzymes in soil rapidly hydrolyse the α-1,4 and α-1,6 glycosidic bonds, providing complete mineralisation to co₂ and water — zero environmental persistence compared to synthetic polymer particles.

Typically Found In: Powders,dry shampoos,biodegradable cosmetics

TECHNICAL DETAILS

Primary Category: Active ingredient – cosmetic active

Secondary Functions: Skin conditioning

Application Areas:

Facial Skincare

Body Care

Hair Care

Beard Care

Color Cosmetics (Makeup)

Dietary/Oral Supplements

Typical Concentration Range: 0.5%–30%

SOURCING & ETHICS

Vegan Status: Yes

Halal Status: Yes

Source Notes: Commercially produced for cosmetic use. verify vegan/halal status with supplier.

SKIN COMPATIBILITY

Irritancy Rating: 1/5 – very low

Comedogenicity Rating: 0/5 – non-comedogenic

Sensitivity Concerns: Well-tolerated by most skin types.

Safe for Sensitive Skin: Yes

SAFETY & COMPATIBILITY

Safety Profile: Good safety profile at recommended concentrations. ewg score: 1–2.

Works Well With: Standard skincare actives

Avoid Combining With: No known significant incompatibilities

SCIENTIFIC NOTE

Starch granule oil absorption capacity: oil absorption capacity (oac) of biopolymer powders correlates with granule porosity and internal surface area. rice starch (3–8 μm granules, high surface area) oac ~1.0 g oil/g; tapioca starch (15–35 μm, lower surface area) oac ~0.8 g/g; corn starch (10–25 μm) oac ~0.9 g/g. cross-linked modified starches maintain granule integrity under mechanical stress providing higher effective oac in use conditions. silica (oac ~2.5 g/g) outperforms starches on pure absorbency but the skin feel advantage of the softer biopolymer — particularly the non-abrasive, cushioned texture — justifies the lower oac for sensitive skin powders.

Last Verified: Cosing database,starch biopolymer cosmetic application review

Primary Sources: 2026-03-12

DESCRIPTION

What It Does: Delivers targeted skin-conditioning or bioactive benefits through a specific mechanism of action suited to the formulation's intended purpose.

Why It's Used: Specialty actives address specific skin concerns through targeted molecular mechanisms, providing efficacy beyond what base formulation ingredients alone can achieve.

How It Works: The bioactive compound interacts with specific molecular targets in skin cells or the extracellular matrix — enzymes, receptors, structural proteins, or signaling molecules — triggering beneficial biological responses.

Typically Found In: Serums,treatments,moisturizers,specialty products

TECHNICAL DETAILS

Primary Category: Specialty actives

Secondary Functions: Skin-conditioning,anti-aging

Application Areas:

Facial Skincare

Body Care

Hair Care

Beard Care

Color Cosmetics (Makeup)

Dietary/Oral Supplements

Typical Concentration Range: 0.01–5%

SOURCING & ETHICS

Vegan Status: Yes

Halal Status: Yes

Source Notes: Specialty active ingredient; check individual sourcing for vegan status.

SKIN COMPATIBILITY

Irritancy Rating: 1

Comedogenicity Rating: 0

Sensitivity Concerns: Low sensitization potential at recommended use concentrations.

Safe for Sensitive Skin: Yes

SAFETY & COMPATIBILITY

Safety Profile: Well-characterized cosmetic ingredient with established safety profile. generally non-irritating at typical use concentrations. suitable for leave-on and rinse-off cosmetics.

Works Well With: Niacinamide,hyaluronic acid,vitamin c,peptides

Avoid Combining With: Incompatible with oxidizing agents; check ph stability

SCIENTIFIC NOTE

Specialty actives typically work through enzyme inhibition (e.g., tyrosinase inhibition for brightening, mmp inhibition for anti-aging), receptor activation (e.g., retinoid receptors, ppar-γ for barrier genes), or transcription factor modulation (e.g., nrf2 for antioxidant gene upregulation). structure-activity relationships determine potency and selectivity.

Last Verified: Cosing eu database; pcpc cosmetic ingredient safety reviews; ingredient-specific safety and efficacy literature

Primary Sources: 2025-01-15

DESCRIPTION

What It Does: Glycerin pulls water from the environment and deeper skin layers into the outer skin layer (epidermis), boosting moisture levels and keeping skin soft, smooth, and plump.

Why It's Used: It is used in virtually every moisturizer, serum, and cleanser because it is highly effective at hydrating skin, is well-tolerated by all skin types, and enhances the texture and spreadability of formulations.

How It Works: As a humectant, glycerin forms hydrogen bonds with water molecules, trapping them in the skin. it also reinforces the skin barrier by integrating into lipid structures between skin cells.

Typically Found In: Moisturizers,serums,cleansers,toners,sheet masks,sunscreens,body lotions,shampoos,conditioners

TECHNICAL DETAILS

Primary Category: Humectant

Secondary Functions: Skin barrier support,emollient,solvent

Application Areas:

Facial Skincare

Body Care

Hair Care

Beard Care

Color Cosmetics (Makeup)

Dietary/Oral Supplements

Typical Concentration Range: 1%–30% (typical: 3–10%)

SOURCING & ETHICS

Vegan Status: Yes – plant-derived (coconut, soy, palm) or synthetic

Halal Status: Yes – when plant-derived or synthetic; verify source with supplier

Source Notes: Derived from plant oils via hydrolysis or saponification; synthetic versions also available. palm-derived glycerin carries sustainability concerns.

SKIN COMPATIBILITY

Irritancy Rating: 1/5 – very low; non-irritating at all standard concentrations

Comedogenicity Rating: 0/5 – non-comedogenic

Sensitivity Concerns: Extremely rare allergic reactions; generally safe for all skin types including sensitive and baby skin

Safe for Sensitive Skin: Yes

SAFETY & COMPATIBILITY

Safety Profile: Widely recognized as safe. ewg hazard score: 1. no significant concerns for irritation, sensitization, or toxicity at typical concentrations (up to 50%).

Works Well With: Hyaluronic acid,ceramides,niacinamide,panthenol,urea,peptides,retinol,ahas/bhas

Avoid Combining With: No known incompatibilities at standard concentrations

SCIENTIFIC NOTE

Glycerin is an endogenous skin component found naturally in the stratum corneum. aquaporin-3 channels in keratinocytes facilitate glycerin transport, making it integral to natural skin hydration pathways.

Last Verified: Cosing database,cir safety assessment,ewg skin deep,inci decoder

Primary Sources: 2026-03-12

DESCRIPTION

What It Does: Provides o/w emulsification with emolliency and skin feel improvement from a natural glycerol ester.

Why It's Used: Standard cosmetic monoglyceride emulsifier – widely used for o/w cream formation with clean, natural-origin credentials and good sensory profile.

How It Works: Monoglyceride structure (one fatty acid + glycerol) provides amphiphilic hlb ~3-4 for o/w emulsification when combined with higher hlb co-emulsifiers. forms alpha-gel lamellar structure with water for emulsion stabilization. direct skin conditioning via fatty acid film.

Typically Found In: Creams,lotions,moisturizers – standard in o/w emulsions

TECHNICAL DETAILS

Primary Category: Functional ingredient – monoglyceride emulsifier

Secondary Functions: Barrier sealing,softening

Application Areas:

Facial Skincare

Body Care

Hair Care

Beard Care

Color Cosmetics (Makeup)

Dietary/Oral Supplements

Typical Concentration Range: 1%–10%

SOURCING & ETHICS

Vegan Status: Yes – from vegetable glycerol and stearic acid

Halal Status: Yes

Source Notes: Plant-derived, synthetic or animal-derived. verify source.

SKIN COMPATIBILITY

Irritancy Rating: 1/5 – very low

Comedogenicity Rating: 1/5 – low; formulation-dependent

Sensitivity Concerns: Non-irritating.

Safe for Sensitive Skin: Yes

SAFETY & COMPATIBILITY

Safety Profile: Excellent safety profile. ewg score: 1.

Works Well With: Humectants,ceramides,actives as carrier

Avoid Combining With: No significant incompatibilities

SCIENTIFIC NOTE

Glyceryl stearate's alpha-gel lamellar phase formation (distinguishable by x-ray crystallography from beta crystalline phase) provides superior emulsion stability compared to its beta crystalline form. the alpha-gel phase creates a viscoelastic network that resists droplet coalescence – the fundamental mechanism behind gms's long use as a reliable primary emulsifier.

Last Verified: Cosing database,cir safety assessment

Primary Sources: 2026-03-12