Kenra Professional Volume Spray 25 Coastal Breeze

DESCRIPTION

What It Does: Alcohol denat. dissolves oil-soluble and water-soluble cosmetic actives, provides rapid antimicrobial activity at concentrations above 60–70% by denaturing microbial proteins, delivers a refreshing cooling sensation through evaporative cooling on skin, and temporarily enhances the penetration of topical actives by transiently disrupting the stratum corneum lipid bilayer organisation.

Why It's Used: Formulators choose alcohol denat. for its irreplaceable combination of solvent power, antimicrobial activity, and penetration-enhancing properties. no other cosmetic solvent simultaneously provides the cooling sensory experience of alcohol (from evaporative cooling at the skin surface), the immediate antimicrobial activity required for sanitisers (from protein denaturation above 60%), and the transient sc lipid disruption that improves active ingredient delivery (essential in actives-rich toners and essences). for denatured alcohol specifically, denaturing agents (typically 5% isopropanol or bitrex) prevent consumption without affecting cosmetic function.

How It Works: Alcohol denat. works through multiple mechanisms depending on concentration: (1) solvent action — alcohol's hydroxyl group provides hydrogen bonding with water while the short alkyl chain provides interaction with organic solutes, enabling dissolution of both hydrophilic and moderately lipophilic cosmetic actives in a single solvent; (2) antimicrobial — above 60% concentration, ethanol denatures microbial proteins by disrupting non-covalent bonds maintaining protein secondary and tertiary structure — the alcohol molecules intercalate between protein chains, disrupting the hydrophobic interactions and hydrogen bonds that maintain enzyme active site geometry. this non-specific protein denaturation is immediately bactericidal and virucidal with no resistance mechanism possible; (3) sc penetration enhancement — at lower concentrations (5–30%), ethanol transiently fluidises the sc lipid bilayer by intercalating between the ordered lipid lamellae, disrupting the crystal packing and increasing lipid bilayer fluidity. this transient fluidisation increases the diffusion coefficient of co-applied actives through the sc for up to 30 minutes post-application; (4) astringency — alcohol's protein precipitating action at the skin surface contracts superficial proteins, temporarily tightening pores and reducing oiliness.

Typically Found In: Toners,hand sanitisers,actives serums

TECHNICAL DETAILS

Primary Category: Active ingredient – cosmetic active

Secondary Functions: Skin conditioning

Application Areas:

Facial Skincare

Body Care

Hair Care

Beard Care

Color Cosmetics (Makeup)

Dietary/Oral Supplements

Typical Concentration Range: 5%–95%

SOURCING & ETHICS

Vegan Status: Yes

Halal Status: Yes

Source Notes: Commercially produced for cosmetic use. verify vegan/halal status with supplier.

SKIN COMPATIBILITY

Irritancy Rating: 1/5 – very low

Comedogenicity Rating: 0/5 – non-comedogenic

Sensitivity Concerns: Well-tolerated by most skin types.

Safe for Sensitive Skin: Yes

SAFETY & COMPATIBILITY

Safety Profile: Good safety profile at recommended concentrations. ewg score: 1–2.

Works Well With: Standard skincare actives

Avoid Combining With: No known significant incompatibilities

SCIENTIFIC NOTE

Ethanol concentration-dependent antimicrobial efficacy: below 40% — minimal bactericidal effect (insufficient protein denaturation); 40–60% — bacteriostatic, not bactericidal; 60–70% — peak bactericidal efficacy against both enveloped and non-enveloped viruses and vegetative bacteria (optimal water content maintains protein hydration required for denaturation to proceed); 80–90% — remains effective but slightly reduced from decreased water activity; 95–100% — reduced efficacy (insufficient water for protein denaturation). the 70% 'sweet spot' for sanitisers reflects this concentration-efficacy peak, not a formulation convenience.

Last Verified: Cosing database,alcohol denat. ethanol solvent antimicrobial review

Primary Sources: 2026-03-12

DESCRIPTION

What It Does: Delivers characteristic cosmetic function at recommended use concentration.

Why It's Used: Selected for functional contribution and formulation compatibility supported by cosmetic science and regulatory safety data.

How It Works: Works through the mechanism of its molecular class — physicochemical or biological interaction with skin proteins, lipids, or receptors as documented in peer-reviewed cosmetic literature.

Typically Found In: Skin care formulations

TECHNICAL DETAILS

Primary Category: Active ingredient – cosmetic active

Secondary Functions: Skin conditioning

Application Areas:

Facial Skincare

Body Care

Hair Care

Beard Care

Color Cosmetics (Makeup)

Dietary/Oral Supplements

Typical Concentration Range: 0.1%–10%

SOURCING & ETHICS

Vegan Status: Conditional

Halal Status: Yes

Source Notes: Commercially produced for cosmetic use. verify vegan/halal status with supplier.

SKIN COMPATIBILITY

Irritancy Rating: 1/5 – very low

Comedogenicity Rating: 0/5 – non-comedogenic

Sensitivity Concerns: Well-tolerated by most skin types.

Safe for Sensitive Skin: Yes

SAFETY & COMPATIBILITY

Safety Profile: Good safety profile at recommended concentrations. ewg score: 1–2.

Works Well With: Standard skincare actives

Avoid Combining With: No known significant incompatibilities

SCIENTIFIC NOTE

Aminomethyl propanol has an established safety and efficacy profile within the cosmetic regulatory framework at standard use concentrations.

Last Verified: Cosing database,aminomethyl propanol technical literature

Primary Sources: 2026-03-12

DESCRIPTION

What It Does: Provides combined gentle cleansing and wheat protein conditioning from n-acyl hydrolysed protein.

Why It's Used: Conditioning surfactant — n-acyl hydrolysed wheat protein delivers both surfactant cleansing and protein conditioning simultaneously, with substantive protein deposition on hair or skin during rinse providing post-wash conditioning feel.

How It Works: Hydrolysed wheat protein + acyl chloride → n-acyl protein sodium salt. dual function: surfactant + conditioner. protein deposition: substantive post-rinse. film-forming. gentle. hair: cuticle protein film. skin: moisture retention.

Typically Found In: Conditioning shampoos,protein-rich cleansers

TECHNICAL DETAILS

Primary Category: Active ingredient – cosmetic active

Secondary Functions: Skin conditioning

Application Areas:

Facial Skincare

Body Care

Hair Care

Beard Care

Color Cosmetics (Makeup)

Dietary/Oral Supplements

Typical Concentration Range: 2%–15%

SOURCING & ETHICS

Vegan Status: Conditional

Halal Status: Yes

Source Notes: Commercially produced for cosmetic use. verify vegan/halal status with supplier.

SKIN COMPATIBILITY

Irritancy Rating: 1/5 – very low

Comedogenicity Rating: 0/5 – non-comedogenic

Sensitivity Concerns: Well-tolerated by most skin types.

Safe for Sensitive Skin: Yes

SAFETY & COMPATIBILITY

Safety Profile: Good safety profile at recommended concentrations. ewg score: 1–2.

Works Well With: Standard skincare actives

Avoid Combining With: No known significant incompatibilities

SCIENTIFIC NOTE

N-acyl protein surfactant substantive deposition: the hydrolysed wheat protein chain (mw 500-5000 da depending on hydrolysis degree) deposits on hair or skin during rinsing from the opposing charge gradient of the anionic acyl head and the positively charged amino acid residues in the protein chain. substantive deposition provides post-rinse conditioning from protein film formation on the surface — a cleansing and conditioning dual function from one ingredient.

Last Verified: Cosing database,n-acyl hydrolyzed wheat protein surfactant review

Primary Sources: 2026-03-12

DESCRIPTION

What It Does: Provides combined gentle cleansing and wheat protein conditioning from n-acyl hydrolysed protein.

Why It's Used: Conditioning surfactant — n-acyl hydrolysed wheat protein delivers both surfactant cleansing and protein conditioning simultaneously, with substantive protein deposition on hair or skin during rinse providing post-wash conditioning feel.

How It Works: Hydrolysed wheat protein + acyl chloride → n-acyl protein sodium salt. dual function: surfactant + conditioner. protein deposition: substantive post-rinse. film-forming. gentle. hair: cuticle protein film. skin: moisture retention.

Typically Found In: Conditioning shampoos,protein-rich cleansers

TECHNICAL DETAILS

Primary Category: Active ingredient – cosmetic active

Secondary Functions: Skin conditioning

Application Areas:

Facial Skincare

Body Care

Hair Care

Beard Care

Color Cosmetics (Makeup)

Dietary/Oral Supplements

Typical Concentration Range: 2%–15%

SOURCING & ETHICS

Vegan Status: Conditional

Halal Status: Yes

Source Notes: Commercially produced for cosmetic use. verify vegan/halal status with supplier.

SKIN COMPATIBILITY

Irritancy Rating: 1/5 – very low

Comedogenicity Rating: 0/5 – non-comedogenic

Sensitivity Concerns: Well-tolerated by most skin types.

Safe for Sensitive Skin: Yes

SAFETY & COMPATIBILITY

Safety Profile: Good safety profile at recommended concentrations. ewg score: 1–2.

Works Well With: Standard skincare actives

Avoid Combining With: No known significant incompatibilities

SCIENTIFIC NOTE

N-acyl protein surfactant substantive deposition: the hydrolysed wheat protein chain (mw 500-5000 da depending on hydrolysis degree) deposits on hair or skin during rinsing from the opposing charge gradient of the anionic acyl head and the positively charged amino acid residues in the protein chain. substantive deposition provides post-rinse conditioning from protein film formation on the surface — a cleansing and conditioning dual function from one ingredient.

Last Verified: Cosing database,n-acyl hydrolyzed wheat protein surfactant review

Primary Sources: 2026-03-12

DESCRIPTION

What It Does: Prevents microbial contamination that would otherwise render water-containing cosmetics unsafe — inhibiting bacterial, fungal, and yeast growth through membrane disruption, enzyme inhibition, or metabolic interference at permitted regulatory concentrations.

Why It's Used: Preservatives are safety-critical — un-preserved water-containing cosmetics can develop dangerous microbial contamination (pseudomonas aeruginosa eye infections, s. aureus skin infections) within days. preservation is a regulatory requirement, not an optional enhancement.

How It Works: Mechanism varies by class: organic acids (benzoic, dehydroacetic) disrupt intracellular ph in bacteria and fungi by proton flux across membranes; parabens inhibit membrane-associated enzyme function; chlorhexidine disrupts bacterial and fungal membrane integrity through divalent ion chelation of membrane phospholipids.

Typically Found In: All aqueous formulations

TECHNICAL DETAILS

Primary Category: Active ingredient – cosmetic active

Secondary Functions: Skin conditioning

Application Areas:

Facial Skincare

Body Care

Hair Care

Beard Care

Color Cosmetics (Makeup)

Dietary/Oral Supplements

Typical Concentration Range: Check annex v eu limits

SOURCING & ETHICS

Vegan Status: Yes

Halal Status: Yes

Source Notes: Commercially produced for cosmetic use. verify vegan/halal status with supplier.

SKIN COMPATIBILITY

Irritancy Rating: 1/5 – very low

Comedogenicity Rating: 0/5 – non-comedogenic

Sensitivity Concerns: Well-tolerated by most skin types.

Safe for Sensitive Skin: Yes

SAFETY & COMPATIBILITY

Safety Profile: Good safety profile at recommended concentrations. ewg score: 1–2.

Works Well With: Standard skincare actives

Avoid Combining With: No known significant incompatibilities

SCIENTIFIC NOTE

Eu regulation 1223/2009 annex v lists all permitted preservatives with maximum concentrations — preservatives not listed are prohibited. formulators must verify both permitted status and maximum concentration for each market before finalising preservation systems.

Last Verified: Eu regulation 1223/2009 annex v,cosmetic preservative regulatory review

Primary Sources: 2026-03-12

DESCRIPTION

What It Does: Absorbs or reflects uv radiation, preventing uv-induced dna damage, photo-oxidative stress, and premature skin aging.

Why It's Used: Uv filters are the active ingredients in sun protection — without them, formulations cannot make spf claims or prevent solar-induced skin damage.

How It Works: The uv-absorbing chromophore undergoes photoexcitation by uv photons, then dissipates the absorbed energy through thermal relaxation (chemical filters) or photon scattering/reflection (physical filters), preventing photon penetration to skin cells.

Typically Found In: Sunscreens,moisturizers with spf,foundations with spf

TECHNICAL DETAILS

Primary Category: Uv filters

Secondary Functions: Skin-protecting

Application Areas:

Facial Skincare

Body Care

Hair Care

Beard Care

Color Cosmetics (Makeup)

Dietary/Oral Supplements

Typical Concentration Range: 0.5–25% (within regulatory limits)

SOURCING & ETHICS

Vegan Status: Yes

Halal Status: Yes

Source Notes: Synthetic uv filter; no animal components.

SKIN COMPATIBILITY

Irritancy Rating: 1

Comedogenicity Rating: 0

Sensitivity Concerns: Contact allergy to uv filters occurs in approximately 1–3% of the general population; patch testing recommended for those with known photosensitivity.

Safe for Sensitive Skin: Yes

SAFETY & COMPATIBILITY

Safety Profile: Regulatory approval required per market (eu annex vi, fda otc monograph, etc.). generally non-irritating at approved concentrations.

Works Well With: Other uv filters,antioxidants,emollients

Avoid Combining With: Incompatible filter combinations (photodegradation); check regulatory approvals per region

SCIENTIFIC NOTE

Uv filters operate through two mechanisms: organic/chemical filters absorb uv photons through electronic excitation (π→π* transitions in conjugated systems), then dissipate energy via thermal relaxation; inorganic/physical filters (tio2, zno) scatter and reflect photons through mie scattering (particle size 50–300 nm) and band gap absorption. spf is measured in vivo (iso 24444) as the ratio of minimal erythema doses with and without sunscreen.

Last Verified: Cosing eu database; pcpc cosmetic ingredient safety reviews; eu cosmetics regulation annex vi; iso 24444 (in vivo spf testing)

Primary Sources: 2025-01-15

DESCRIPTION

What It Does: Absorbs or reflects uv radiation, preventing uv-induced dna damage, photo-oxidative stress, and premature skin aging.

Why It's Used: Uv filters are the active ingredients in sun protection — without them, formulations cannot make spf claims or prevent solar-induced skin damage.

How It Works: The uv-absorbing chromophore undergoes photoexcitation by uv photons, then dissipates the absorbed energy through thermal relaxation (chemical filters) or photon scattering/reflection (physical filters), preventing photon penetration to skin cells.

Typically Found In: Sunscreens,moisturizers with spf,foundations with spf

TECHNICAL DETAILS

Primary Category: Uv filters

Secondary Functions: Skin-protecting

Application Areas:

Facial Skincare

Body Care

Hair Care

Beard Care

Color Cosmetics (Makeup)

Dietary/Oral Supplements

Typical Concentration Range: 0.5–25% (within regulatory limits)

SOURCING & ETHICS

Vegan Status: Yes

Halal Status: Yes

Source Notes: Synthetic uv filter; no animal components.

SKIN COMPATIBILITY

Irritancy Rating: 1

Comedogenicity Rating: 0

Sensitivity Concerns: Contact allergy to uv filters occurs in approximately 1–3% of the general population; patch testing recommended for those with known photosensitivity.

Safe for Sensitive Skin: Yes

SAFETY & COMPATIBILITY

Safety Profile: Regulatory approval required per market (eu annex vi, fda otc monograph, etc.). generally non-irritating at approved concentrations.

Works Well With: Other uv filters,antioxidants,emollients

Avoid Combining With: Incompatible filter combinations (photodegradation); check regulatory approvals per region

SCIENTIFIC NOTE

Uv filters operate through two mechanisms: organic/chemical filters absorb uv photons through electronic excitation (π→π* transitions in conjugated systems), then dissipate energy via thermal relaxation; inorganic/physical filters (tio2, zno) scatter and reflect photons through mie scattering (particle size 50–300 nm) and band gap absorption. spf is measured in vivo (iso 24444) as the ratio of minimal erythema doses with and without sunscreen.

Last Verified: Cosing eu database; pcpc cosmetic ingredient safety reviews; eu cosmetics regulation annex vi; iso 24444 (in vivo spf testing)

Primary Sources: 2025-01-15

DESCRIPTION

What It Does: Provides dual fragrance and preservative activity as an aromatic alcohol.

Why It's Used: Multi-function ingredient serving as both fragrance component and preservative – reduces formulation complexity by providing both functions in one ingredient.

How It Works: Phenylcarbinol provides antimicrobial activity via membrane disruption (effective vs gram-positive bacteria and moulds). solvent for fragrances and difficult-to-dissolve actives. mild oxidative conversion to benzaldehyde provides sweet almond-like fragrance.

Typically Found In: Fragrances,preserved cosmetics,solvent systems

TECHNICAL DETAILS

Primary Category: Fragrance component / preservative

Secondary Functions: Skin conditioning

Application Areas:

Facial Skincare

Body Care

Hair Care

Beard Care

Color Cosmetics (Makeup)

Dietary/Oral Supplements

Typical Concentration Range: 0.001%–1% (fragrance); up to 1% as preservative

SOURCING & ETHICS

Vegan Status: Yes – from toluene, or jasmine absolute

Halal Status: Yes

Source Notes: Commercially produced for cosmetic use. verify vegan/halal status with supplier.

SKIN COMPATIBILITY

Irritancy Rating: 1/5 – very low

Comedogenicity Rating: 0/5 – non-comedogenic

Sensitivity Concerns: Well-tolerated by most skin types.

Safe for Sensitive Skin: Yes

SAFETY & COMPATIBILITY

Safety Profile: Eu cosmetics regulation: declared fragrance allergen. also listed as approved preservative (annex v, max 1%). dual regulatory status (fragrance + preservative) depending on function and concentration.

Works Well With: Standard skincare actives

Avoid Combining With: No known significant incompatibilities

SCIENTIFIC NOTE

Benzyl alcohol's dual regulatory status (fragrance allergen and approved preservative) creates a formulation paradox: it must be listed as a fragrance allergen if present >0.001% (leave-on) regardless of whether it was added for fragrance or preservation. this regulatory dual identity means a preservative added for antimicrobial function triggers the same allergen declaration requirement as a fragrance added for scent.

Last Verified: Cosing database,ifra standards,eu preservative annex v

Primary Sources: 2026-03-12

DESCRIPTION

What It Does: Provides floral-balsamic scent with uv-absorbing fixative properties.

Why It's Used: Natural jasmine-associated fragrance ester with mild uv protection contribution for fragranced sun-exposed products.

How It Works: Salicylate ester absorbs uv-b mildly. provides fixative function by slowing evaporation of lighter fragrance top notes. naturally in jasmine absolute (1-3%). good skin absorption.

Typically Found In: Floral fragrances,sun-exposed products

TECHNICAL DETAILS

Primary Category: Fragrance component – floral fixative

Secondary Functions: Skin conditioning

Application Areas:

Facial Skincare

Body Care

Hair Care

Beard Care

Color Cosmetics (Makeup)

Dietary/Oral Supplements

Typical Concentration Range: 0.001%–1%

SOURCING & ETHICS

Vegan Status: Yes – from jasmine absolute, or synthetic

Halal Status: Yes

Source Notes: Commercially produced for cosmetic use. verify vegan/halal status with supplier.

SKIN COMPATIBILITY

Irritancy Rating: 1/5 – very low

Comedogenicity Rating: 0/5 – non-comedogenic

Sensitivity Concerns: Well-tolerated by most skin types.

Safe for Sensitive Skin: Yes

SAFETY & COMPATIBILITY

Safety Profile: Eu cosmetics regulation: declared fragrance allergen. ifra guidelines apply.

Works Well With: Standard skincare actives

Avoid Combining With: No known significant incompatibilities

SCIENTIFIC NOTE

Benzyl salicylate's salicylate moiety provides uv absorption in the uvb range (absorbs at 295-315nm) despite not being a registered uv filter. its occurrence in jasmine absolute means natural jasmine-fragranced products inherently contain a mild uv absorber – an incidental benefit of the natural fragrance chemistry that wasn't intentionally designed as photoprotection.

Last Verified: Cosing database,ifra standards

Primary Sources: 2026-03-12

DESCRIPTION

What It Does: Delivers characteristic cosmetic function at recommended use concentration.

Why It's Used: Selected for functional contribution and formulation compatibility supported by cosmetic science and regulatory safety data.

How It Works: Works through the mechanism of its molecular class — physicochemical or biological interaction with skin proteins, lipids, or receptors as documented in peer-reviewed cosmetic literature.

Typically Found In: Skin care formulations

TECHNICAL DETAILS

Primary Category: Active ingredient – cosmetic active

Secondary Functions: Skin conditioning

Application Areas:

Facial Skincare

Body Care

Hair Care

Beard Care

Color Cosmetics (Makeup)

Dietary/Oral Supplements

Typical Concentration Range: 0.1%–10%

SOURCING & ETHICS

Vegan Status: Conditional

Halal Status: Yes

Source Notes: Commercially produced for cosmetic use. verify vegan/halal status with supplier.

SKIN COMPATIBILITY

Irritancy Rating: 1/5 – very low

Comedogenicity Rating: 0/5 – non-comedogenic

Sensitivity Concerns: Well-tolerated by most skin types.

Safe for Sensitive Skin: Yes

SAFETY & COMPATIBILITY

Safety Profile: Good safety profile at recommended concentrations. ewg score: 1–2.

Works Well With: Standard skincare actives

Avoid Combining With: No known significant incompatibilities

SCIENTIFIC NOTE

C12-15 alkyl benzoate has an established safety and efficacy profile within the cosmetic regulatory framework at standard use concentrations.

Last Verified: Cosing database,c12-15 alkyl benzoate technical literature

Primary Sources: 2026-03-12