Matsukiyo Strong Styling Gel Ultra Super Hard 230g

DESCRIPTION

What It Does: Alcohol denat. dissolves oil-soluble and water-soluble cosmetic actives, provides rapid antimicrobial activity at concentrations above 60–70% by denaturing microbial proteins, delivers a refreshing cooling sensation through evaporative cooling on skin, and temporarily enhances the penetration of topical actives by transiently disrupting the stratum corneum lipid bilayer organisation.

Why It's Used: Formulators choose alcohol denat. for its irreplaceable combination of solvent power, antimicrobial activity, and penetration-enhancing properties. no other cosmetic solvent simultaneously provides the cooling sensory experience of alcohol (from evaporative cooling at the skin surface), the immediate antimicrobial activity required for sanitisers (from protein denaturation above 60%), and the transient sc lipid disruption that improves active ingredient delivery (essential in actives-rich toners and essences). for denatured alcohol specifically, denaturing agents (typically 5% isopropanol or bitrex) prevent consumption without affecting cosmetic function.

How It Works: Alcohol denat. works through multiple mechanisms depending on concentration: (1) solvent action — alcohol's hydroxyl group provides hydrogen bonding with water while the short alkyl chain provides interaction with organic solutes, enabling dissolution of both hydrophilic and moderately lipophilic cosmetic actives in a single solvent; (2) antimicrobial — above 60% concentration, ethanol denatures microbial proteins by disrupting non-covalent bonds maintaining protein secondary and tertiary structure — the alcohol molecules intercalate between protein chains, disrupting the hydrophobic interactions and hydrogen bonds that maintain enzyme active site geometry. this non-specific protein denaturation is immediately bactericidal and virucidal with no resistance mechanism possible; (3) sc penetration enhancement — at lower concentrations (5–30%), ethanol transiently fluidises the sc lipid bilayer by intercalating between the ordered lipid lamellae, disrupting the crystal packing and increasing lipid bilayer fluidity. this transient fluidisation increases the diffusion coefficient of co-applied actives through the sc for up to 30 minutes post-application; (4) astringency — alcohol's protein precipitating action at the skin surface contracts superficial proteins, temporarily tightening pores and reducing oiliness.

Typically Found In: Toners,hand sanitisers,actives serums

TECHNICAL DETAILS

Primary Category: Active ingredient – cosmetic active

Secondary Functions: Skin conditioning

Application Areas:

Facial Skincare

Body Care

Hair Care

Beard Care

Color Cosmetics (Makeup)

Dietary/Oral Supplements

Typical Concentration Range: 5%–95%

SOURCING & ETHICS

Vegan Status: Yes

Halal Status: Yes

Source Notes: Commercially produced for cosmetic use. verify vegan/halal status with supplier.

SKIN COMPATIBILITY

Irritancy Rating: 1/5 – very low

Comedogenicity Rating: 0/5 – non-comedogenic

Sensitivity Concerns: Well-tolerated by most skin types.

Safe for Sensitive Skin: Yes

SAFETY & COMPATIBILITY

Safety Profile: Good safety profile at recommended concentrations. ewg score: 1–2.

Works Well With: Standard skincare actives

Avoid Combining With: No known significant incompatibilities

SCIENTIFIC NOTE

Ethanol concentration-dependent antimicrobial efficacy: below 40% — minimal bactericidal effect (insufficient protein denaturation); 40–60% — bacteriostatic, not bactericidal; 60–70% — peak bactericidal efficacy against both enveloped and non-enveloped viruses and vegetative bacteria (optimal water content maintains protein hydration required for denaturation to proceed); 80–90% — remains effective but slightly reduced from decreased water activity; 95–100% — reduced efficacy (insufficient water for protein denaturation). the 70% 'sweet spot' for sanitisers reflects this concentration-efficacy peak, not a formulation convenience.

Last Verified: Cosing database,alcohol denat. ethanol solvent antimicrobial review

Primary Sources: 2026-03-12

DESCRIPTION

What It Does: Alcohol denat. dissolves oil-soluble and water-soluble cosmetic actives, provides rapid antimicrobial activity at concentrations above 60–70% by denaturing microbial proteins, delivers a refreshing cooling sensation through evaporative cooling on skin, and temporarily enhances the penetration of topical actives by transiently disrupting the stratum corneum lipid bilayer organisation.

Why It's Used: Formulators choose alcohol denat. for its irreplaceable combination of solvent power, antimicrobial activity, and penetration-enhancing properties. no other cosmetic solvent simultaneously provides the cooling sensory experience of alcohol (from evaporative cooling at the skin surface), the immediate antimicrobial activity required for sanitisers (from protein denaturation above 60%), and the transient sc lipid disruption that improves active ingredient delivery (essential in actives-rich toners and essences). for denatured alcohol specifically, denaturing agents (typically 5% isopropanol or bitrex) prevent consumption without affecting cosmetic function.

How It Works: Alcohol denat. works through multiple mechanisms depending on concentration: (1) solvent action — alcohol's hydroxyl group provides hydrogen bonding with water while the short alkyl chain provides interaction with organic solutes, enabling dissolution of both hydrophilic and moderately lipophilic cosmetic actives in a single solvent; (2) antimicrobial — above 60% concentration, ethanol denatures microbial proteins by disrupting non-covalent bonds maintaining protein secondary and tertiary structure — the alcohol molecules intercalate between protein chains, disrupting the hydrophobic interactions and hydrogen bonds that maintain enzyme active site geometry. this non-specific protein denaturation is immediately bactericidal and virucidal with no resistance mechanism possible; (3) sc penetration enhancement — at lower concentrations (5–30%), ethanol transiently fluidises the sc lipid bilayer by intercalating between the ordered lipid lamellae, disrupting the crystal packing and increasing lipid bilayer fluidity. this transient fluidisation increases the diffusion coefficient of co-applied actives through the sc for up to 30 minutes post-application; (4) astringency — alcohol's protein precipitating action at the skin surface contracts superficial proteins, temporarily tightening pores and reducing oiliness.

Typically Found In: Toners,hand sanitisers,actives serums

TECHNICAL DETAILS

Primary Category: Active ingredient – cosmetic active

Secondary Functions: Skin conditioning

Application Areas:

Facial Skincare

Body Care

Hair Care

Beard Care

Color Cosmetics (Makeup)

Dietary/Oral Supplements

Typical Concentration Range: 5%–95%

SOURCING & ETHICS

Vegan Status: Yes

Halal Status: Yes

Source Notes: Commercially produced for cosmetic use. verify vegan/halal status with supplier.

SKIN COMPATIBILITY

Irritancy Rating: 1/5 – very low

Comedogenicity Rating: 0/5 – non-comedogenic

Sensitivity Concerns: Well-tolerated by most skin types.

Safe for Sensitive Skin: Yes

SAFETY & COMPATIBILITY

Safety Profile: Good safety profile at recommended concentrations. ewg score: 1–2.

Works Well With: Standard skincare actives

Avoid Combining With: No known significant incompatibilities

SCIENTIFIC NOTE

Ethanol concentration-dependent antimicrobial efficacy: below 40% — minimal bactericidal effect (insufficient protein denaturation); 40–60% — bacteriostatic, not bactericidal; 60–70% — peak bactericidal efficacy against both enveloped and non-enveloped viruses and vegetative bacteria (optimal water content maintains protein hydration required for denaturation to proceed); 80–90% — remains effective but slightly reduced from decreased water activity; 95–100% — reduced efficacy (insufficient water for protein denaturation). the 70% 'sweet spot' for sanitisers reflects this concentration-efficacy peak, not a formulation convenience.

Last Verified: Cosing database,alcohol denat. ethanol solvent antimicrobial review

Primary Sources: 2026-03-12

DESCRIPTION

What It Does: Provides transparent gel textures and thickening at very low concentrations via ph-responsive swelling.

Why It's Used: The most widely used gel thickener – provides crystal-clear, stable gels at concentrations as low as 0.1-0.5% with ph-controlled viscosity.

How It Works: Highly crosslinked polyacrylic acid remains tightly coiled at acidic ph. neutralization with naoh or triethanolamine ionizes carboxylic groups causing electrostatic repulsion that unfolds and swells the polymer coils, dramatically increasing viscosity. concentration-dependent thickening.

Typically Found In: Gels,serums,emulsions,sunscreens

TECHNICAL DETAILS

Primary Category: Functional ingredient – polyacrylic acid thickener

Secondary Functions: Skin conditioning

Application Areas:

Facial Skincare

Body Care

Hair Care

Beard Care

Color Cosmetics (Makeup)

Dietary/Oral Supplements

Typical Concentration Range: 0.1%–2%

SOURCING & ETHICS

Vegan Status: Yes – synthetic

Halal Status: Yes

Source Notes: Commercially produced for cosmetic use. verify vegan/halal status with supplier.

SKIN COMPATIBILITY

Irritancy Rating: 1/5 – very low

Comedogenicity Rating: 0/5 – non-comedogenic

Sensitivity Concerns: Well-tolerated by most skin types.

Safe for Sensitive Skin: Yes

SAFETY & COMPATIBILITY

Safety Profile: Good safety profile at recommended concentrations. ewg score: 1–2.

Works Well With: Standard skincare actives

Avoid Combining With: No known significant incompatibilities

SCIENTIFIC NOTE

Carbomer's ph-responsive swelling mechanism provides an elegant formulation control tool: a neutralized gel can be liquefied by ph reduction (adding acid) and re-thickened by reneutralization. this reversible rheology control allows two-phase products that mix on application without the need for mechanical emulsification.

Last Verified: Cosing database,cir safety assessment

Primary Sources: 2026-03-12

DESCRIPTION

What It Does: Provides the complete fragrance profile contributing to product sensory experience and consumer appeal.

Why It's Used: Fragrance is a major consumer purchase driver — up to 70% of consumers make purchasing decisions partially based on product scent.

How It Works: Fragrance blends interact with olfactory receptors providing the sensory profile — complex mixtures activate multiple receptor types for rich, multidimensional scent experiences.

Typically Found In: All fragrance products

TECHNICAL DETAILS

Primary Category: Active ingredient – cosmetic active

Secondary Functions: Skin conditioning

Application Areas:

Facial Skincare

Body Care

Hair Care

Beard Care

Color Cosmetics (Makeup)

Dietary/Oral Supplements

Typical Concentration Range: Standard use levels

SOURCING & ETHICS

Vegan Status: Conditional

Halal Status: Yes

Source Notes: Commercially produced for cosmetic use. verify vegan/halal status with supplier.

SKIN COMPATIBILITY

Irritancy Rating: 1/5 – very low

Comedogenicity Rating: 0/5 – non-comedogenic

Sensitivity Concerns: Well-tolerated by most skin types.

Safe for Sensitive Skin: Yes

SAFETY & COMPATIBILITY

Safety Profile: Good safety profile at recommended concentrations. ewg score: 1–2.

Works Well With: Standard skincare actives

Avoid Combining With: No known significant incompatibilities

SCIENTIFIC NOTE

Ifra guidelines set usage limits for fragrance ingredients based on skin sensitisation and phototoxicity assessment for each application category.

Last Verified: Eu regulation 1223/2009 annex iii,ifra standards,fragrance allergen declaration requirements

Primary Sources: 2026-03-12

DESCRIPTION

What It Does: Glycerin pulls water from the environment and deeper skin layers into the outer skin layer (epidermis), boosting moisture levels and keeping skin soft, smooth, and plump.

Why It's Used: It is used in virtually every moisturizer, serum, and cleanser because it is highly effective at hydrating skin, is well-tolerated by all skin types, and enhances the texture and spreadability of formulations.

How It Works: As a humectant, glycerin forms hydrogen bonds with water molecules, trapping them in the skin. it also reinforces the skin barrier by integrating into lipid structures between skin cells.

Typically Found In: Moisturizers,serums,cleansers,toners,sheet masks,sunscreens,body lotions,shampoos,conditioners

TECHNICAL DETAILS

Primary Category: Humectant

Secondary Functions: Skin barrier support,emollient,solvent

Application Areas:

Facial Skincare

Body Care

Hair Care

Beard Care

Color Cosmetics (Makeup)

Dietary/Oral Supplements

Typical Concentration Range: 1%–30% (typical: 3–10%)

SOURCING & ETHICS

Vegan Status: Yes – plant-derived (coconut, soy, palm) or synthetic

Halal Status: Yes – when plant-derived or synthetic; verify source with supplier

Source Notes: Derived from plant oils via hydrolysis or saponification; synthetic versions also available. palm-derived glycerin carries sustainability concerns.

SKIN COMPATIBILITY

Irritancy Rating: 1/5 – very low; non-irritating at all standard concentrations

Comedogenicity Rating: 0/5 – non-comedogenic

Sensitivity Concerns: Extremely rare allergic reactions; generally safe for all skin types including sensitive and baby skin

Safe for Sensitive Skin: Yes

SAFETY & COMPATIBILITY

Safety Profile: Widely recognized as safe. ewg hazard score: 1. no significant concerns for irritation, sensitization, or toxicity at typical concentrations (up to 50%).

Works Well With: Hyaluronic acid,ceramides,niacinamide,panthenol,urea,peptides,retinol,ahas/bhas

Avoid Combining With: No known incompatibilities at standard concentrations

SCIENTIFIC NOTE

Glycerin is an endogenous skin component found naturally in the stratum corneum. aquaporin-3 channels in keratinocytes facilitate glycerin transport, making it integral to natural skin hydration pathways.

Last Verified: Cosing database,cir safety assessment,ewg skin deep,inci decoder

Primary Sources: 2026-03-12

DESCRIPTION

What It Does: Glycerin pulls water from the environment and deeper skin layers into the outer skin layer (epidermis), boosting moisture levels and keeping skin soft, smooth, and plump.

Why It's Used: It is used in virtually every moisturizer, serum, and cleanser because it is highly effective at hydrating skin, is well-tolerated by all skin types, and enhances the texture and spreadability of formulations.

How It Works: As a humectant, glycerin forms hydrogen bonds with water molecules, trapping them in the skin. it also reinforces the skin barrier by integrating into lipid structures between skin cells.

Typically Found In: Moisturizers,serums,cleansers,toners,sheet masks,sunscreens,body lotions,shampoos,conditioners

TECHNICAL DETAILS

Primary Category: Humectant

Secondary Functions: Skin barrier support,emollient,solvent

Application Areas:

Facial Skincare

Body Care

Hair Care

Beard Care

Color Cosmetics (Makeup)

Dietary/Oral Supplements

Typical Concentration Range: 1%–30% (typical: 3–10%)

SOURCING & ETHICS

Vegan Status: Yes – plant-derived (coconut, soy, palm) or synthetic

Halal Status: Yes – when plant-derived or synthetic; verify source with supplier

Source Notes: Derived from plant oils via hydrolysis or saponification; synthetic versions also available. palm-derived glycerin carries sustainability concerns.

SKIN COMPATIBILITY

Irritancy Rating: 1/5 – very low; non-irritating at all standard concentrations

Comedogenicity Rating: 0/5 – non-comedogenic

Sensitivity Concerns: Extremely rare allergic reactions; generally safe for all skin types including sensitive and baby skin

Safe for Sensitive Skin: Yes

SAFETY & COMPATIBILITY

Safety Profile: Widely recognized as safe. ewg hazard score: 1. no significant concerns for irritation, sensitization, or toxicity at typical concentrations (up to 50%).

Works Well With: Hyaluronic acid,ceramides,niacinamide,panthenol,urea,peptides,retinol,ahas/bhas

Avoid Combining With: No known incompatibilities at standard concentrations

SCIENTIFIC NOTE

Glycerin is an endogenous skin component found naturally in the stratum corneum. aquaporin-3 channels in keratinocytes facilitate glycerin transport, making it integral to natural skin hydration pathways.

Last Verified: Cosing database,cir safety assessment,ewg skin deep,inci decoder

Primary Sources: 2026-03-12

DESCRIPTION

What It Does: Delivers characteristic cosmetic function at recommended use concentration.

Why It's Used: Selected for functional contribution and formulation compatibility supported by cosmetic science and regulatory safety data.

How It Works: Works through the mechanism of its molecular class — physicochemical or biological interaction with skin proteins, lipids, or receptors as documented in peer-reviewed cosmetic literature.

Typically Found In: Skin care formulations

TECHNICAL DETAILS

Primary Category: Active ingredient – cosmetic active

Secondary Functions: Skin conditioning

Application Areas:

Facial Skincare

Body Care

Hair Care

Beard Care

Color Cosmetics (Makeup)

Dietary/Oral Supplements

Typical Concentration Range: 0.1%–10%

SOURCING & ETHICS

Vegan Status: Conditional

Halal Status: Yes

Source Notes: Commercially produced for cosmetic use. verify vegan/halal status with supplier.

SKIN COMPATIBILITY

Irritancy Rating: 1/5 – very low

Comedogenicity Rating: 0/5 – non-comedogenic

Sensitivity Concerns: Well-tolerated by most skin types.

Safe for Sensitive Skin: Yes

SAFETY & COMPATIBILITY

Safety Profile: Good safety profile at recommended concentrations. ewg score: 1–2.

Works Well With: Standard skincare actives

Avoid Combining With: No known significant incompatibilities

SCIENTIFIC NOTE

Methylparaben has an established safety and efficacy profile within the cosmetic regulatory framework at standard use concentrations.

Last Verified: Cosing database,methylparaben technical literature

Primary Sources: 2026-03-12

DESCRIPTION

What It Does: Stabilises o/w emulsions by reducing interfacial tension, solubilises oils and fragrances in aqueous systems, and wets oil-phase components for improved formulation homogeneity.

Why It's Used: Peg emulsifiers are selected for their precise hlb, broad ph stability (unlike soap emulsifiers that lose function at acidic ph), and compatibility with both anionic and cationic co-ingredients in the formulation system.

How It Works: Peg chain length determines hlb: longer peg = higher hlb = more hydrophilic = better o/w emulsification. at the o/w interface, the peg chain extends into the water phase forming a hydrated steric barrier that prevents droplet coalescence. nonionic character provides ph-independent function across the full cosmetic ph range.

Typically Found In: Emulsions,fragrance solubilisation

TECHNICAL DETAILS

Primary Category: Active ingredient – cosmetic active

Secondary Functions: Skin conditioning

Application Areas:

Facial Skincare

Body Care

Hair Care

Beard Care

Color Cosmetics (Makeup)

Dietary/Oral Supplements

Typical Concentration Range: 1%–10%

SOURCING & ETHICS

Vegan Status: Yes

Halal Status: Yes

Source Notes: Commercially produced for cosmetic use. verify vegan/halal status with supplier.

SKIN COMPATIBILITY

Irritancy Rating: 1/5 – very low

Comedogenicity Rating: 0/5 – non-comedogenic

Sensitivity Concerns: Well-tolerated by most skin types.

Safe for Sensitive Skin: Yes

SAFETY & COMPATIBILITY

Safety Profile: Good safety profile at recommended concentrations. ewg score: 1–2.

Works Well With: Standard skincare actives

Avoid Combining With: No known significant incompatibilities

SCIENTIFIC NOTE

Mixed peg emulsifier systems (e.g., peg-100 stearate + glyceryl stearate) form more cohesive interfacial films than single emulsifiers — the geometric complementarity of the co-emulsifier pair providing better mechanical emulsion stability than either component alone.

Last Verified: Cosing database,peg-60 hydrogenated castor oil peg emulsifier review

Primary Sources: 2026-03-12

DESCRIPTION

What It Does: Delivers characteristic cosmetic function at recommended use concentration.

Why It's Used: Selected for functional contribution and formulation compatibility supported by cosmetic science and regulatory safety data.

How It Works: Works through the mechanism of its molecular class — physicochemical or biological interaction with skin proteins, lipids, or receptors as documented in peer-reviewed cosmetic literature.

Typically Found In: Skin care formulations

TECHNICAL DETAILS

Primary Category: Active ingredient – cosmetic active

Secondary Functions: Skin conditioning

Application Areas:

Facial Skincare

Body Care

Hair Care

Beard Care

Color Cosmetics (Makeup)

Dietary/Oral Supplements

Typical Concentration Range: 0.1%–10%

SOURCING & ETHICS

Vegan Status: Conditional

Halal Status: Yes

Source Notes: Commercially produced for cosmetic use. verify vegan/halal status with supplier.

SKIN COMPATIBILITY

Irritancy Rating: 1/5 – very low

Comedogenicity Rating: 0/5 – non-comedogenic

Sensitivity Concerns: Well-tolerated by most skin types.

Safe for Sensitive Skin: Yes

SAFETY & COMPATIBILITY

Safety Profile: Good safety profile at recommended concentrations. ewg score: 1–2.

Works Well With: Standard skincare actives

Avoid Combining With: No known significant incompatibilities

SCIENTIFIC NOTE

Propylparaben has an established safety and efficacy profile within the cosmetic regulatory framework at standard use concentrations.

Last Verified: Cosing database,propylparaben technical literature

Primary Sources: 2026-03-12

DESCRIPTION

What It Does: Provides film formation and hair fixative activity from a water-soluble synthetic polymer.

Why It's Used: Standard hair fixative and film former in styling products – pvp films provide hold, manageability, and styling definition in hair care.

How It Works: Amide carbonyl groups provide water solubility and hydrogen bonding to hair surface. film formation from polymer chain entanglement on water evaporation. variable molecular weight grades provide different film rigidity and humidity resistance.

Typically Found In: Hair sprays,styling gels,hair fixatives,film-forming products

TECHNICAL DETAILS

Primary Category: Functional ingredient – synthetic film former/thickener

Secondary Functions: Skin conditioning

Application Areas:

Facial Skincare

Body Care

Hair Care

Beard Care

Color Cosmetics (Makeup)

Dietary/Oral Supplements

Typical Concentration Range: 0.5%–10%

SOURCING & ETHICS

Vegan Status: Yes – synthetic from petroleum (pvp chain) or n-vinylpyrrolidone

Halal Status: Yes

Source Notes: Commercially produced for cosmetic use. verify vegan/halal status with supplier.

SKIN COMPATIBILITY

Irritancy Rating: 1/5 – very low

Comedogenicity Rating: 0/5 – non-comedogenic

Sensitivity Concerns: Well-tolerated by most skin types.

Safe for Sensitive Skin: Yes

SAFETY & COMPATIBILITY

Safety Profile: Pvp films are humidity-sensitive (hygroscopic) – absorb water in high humidity causing hair style collapse. pvp/va copolymers or other modifications improve humidity resistance.

Works Well With: Standard skincare actives

Avoid Combining With: No known significant incompatibilities

SCIENTIFIC NOTE

Pvp's hair fixative mechanism involves adsorption to and cross-linking between adjacent hair fibers on evaporation of the aqueous vehicle. pvp chains bridge between hair shafts via hydrogen bonding, creating an inter-fiber polymer network that holds hair in its applied configuration. higher mw pvp provides stronger hold from longer polymer chains bridging more fibers simultaneously.

Last Verified: Cosing database,cir safety assessment

Primary Sources: 2026-03-12