Neutrogena Rainbath® Rejuvenating Shower and Bath Gel-Pomegranate - 16 oz

DESCRIPTION

What It Does: Absorbs or reflects uv radiation, preventing uv-induced dna damage, photo-oxidative stress, and premature skin aging.

Why It's Used: Uv filters are the active ingredients in sun protection — without them, formulations cannot make spf claims or prevent solar-induced skin damage.

How It Works: The uv-absorbing chromophore undergoes photoexcitation by uv photons, then dissipates the absorbed energy through thermal relaxation (chemical filters) or photon scattering/reflection (physical filters), preventing photon penetration to skin cells.

Typically Found In: Sunscreens,moisturizers with spf,foundations with spf

TECHNICAL DETAILS

Primary Category: Uv filters

Secondary Functions: Skin-protecting

Application Areas:

Facial Skincare

Body Care

Hair Care

Beard Care

Color Cosmetics (Makeup)

Dietary/Oral Supplements

Typical Concentration Range: 0.5–25% (within regulatory limits)

SOURCING & ETHICS

Vegan Status: Yes

Halal Status: Yes

Source Notes: Synthetic uv filter; no animal components.

SKIN COMPATIBILITY

Irritancy Rating: 1

Comedogenicity Rating: 0

Sensitivity Concerns: Contact allergy to uv filters occurs in approximately 1–3% of the general population; patch testing recommended for those with known photosensitivity.

Safe for Sensitive Skin: Yes

SAFETY & COMPATIBILITY

Safety Profile: Regulatory approval required per market (eu annex vi, fda otc monograph, etc.). generally non-irritating at approved concentrations.

Works Well With: Other uv filters,antioxidants,emollients

Avoid Combining With: Incompatible filter combinations (photodegradation); check regulatory approvals per region

SCIENTIFIC NOTE

Uv filters operate through two mechanisms: organic/chemical filters absorb uv photons through electronic excitation (π→π* transitions in conjugated systems), then dissipate energy via thermal relaxation; inorganic/physical filters (tio2, zno) scatter and reflect photons through mie scattering (particle size 50–300 nm) and band gap absorption. spf is measured in vivo (iso 24444) as the ratio of minimal erythema doses with and without sunscreen.

Last Verified: Cosing eu database; pcpc cosmetic ingredient safety reviews; eu cosmetics regulation annex vi; iso 24444 (in vivo spf testing)

Primary Sources: 2025-01-15

DESCRIPTION

What It Does: Delivers targeted skin-conditioning or bioactive benefits through a specific mechanism of action suited to the formulation's intended purpose.

Why It's Used: Specialty actives address specific skin concerns through targeted molecular mechanisms, providing efficacy beyond what base formulation ingredients alone can achieve.

How It Works: The bioactive compound interacts with specific molecular targets in skin cells or the extracellular matrix — enzymes, receptors, structural proteins, or signaling molecules — triggering beneficial biological responses.

Typically Found In: Serums,treatments,moisturizers,specialty products

TECHNICAL DETAILS

Primary Category: Specialty actives

Secondary Functions: Skin-conditioning,anti-aging

Application Areas:

Facial Skincare

Body Care

Hair Care

Beard Care

Color Cosmetics (Makeup)

Dietary/Oral Supplements

Typical Concentration Range: 0.01–5%

SOURCING & ETHICS

Vegan Status: Yes

Halal Status: Yes

Source Notes: Specialty active ingredient; check individual sourcing for vegan status.

SKIN COMPATIBILITY

Irritancy Rating: 1

Comedogenicity Rating: 0

Sensitivity Concerns: Low sensitization potential at recommended use concentrations.

Safe for Sensitive Skin: Yes

SAFETY & COMPATIBILITY

Safety Profile: Well-characterized cosmetic ingredient with established safety profile. generally non-irritating at typical use concentrations. suitable for leave-on and rinse-off cosmetics.

Works Well With: Niacinamide,hyaluronic acid,vitamin c,peptides

Avoid Combining With: Incompatible with oxidizing agents; check ph stability

SCIENTIFIC NOTE

Specialty actives typically work through enzyme inhibition (e.g., tyrosinase inhibition for brightening, mmp inhibition for anti-aging), receptor activation (e.g., retinoid receptors, ppar-γ for barrier genes), or transcription factor modulation (e.g., nrf2 for antioxidant gene upregulation). structure-activity relationships determine potency and selectivity.

Last Verified: Cosing eu database; pcpc cosmetic ingredient safety reviews; ingredient-specific safety and efficacy literature

Primary Sources: 2025-01-15

DESCRIPTION

What It Does: Adjusts ph to optimal ranges, chelates destabilizing metal ions, provides mild exfoliation at higher concentrations.

Why It's Used: Universal cosmetic ph adjuster and chelating agent. aha exfoliant activity is secondary.

How It Works: As ph adjuster, donates protons. as chelating agent, three carboxylic groups bind divalent metals (ca²⁺, mg²⁺, fe²⁺) preventing oxidative degradation.

Typically Found In: Nearly all cosmetic formulations,brightening products,exfoliants

TECHNICAL DETAILS

Primary Category: Active ingredient – alpha hydroxy acid (aha)

Secondary Functions: Chelating agent,ph adjustment,preservation enhancement

Application Areas:

Facial Skincare

Body Care

Hair Care

Beard Care

Color Cosmetics (Makeup)

Dietary/Oral Supplements

Typical Concentration Range: 0.1%–10%

SOURCING & ETHICS

Vegan Status: Yes – synthetic or fermentation-derived

Halal Status: Yes

Source Notes: Produced by fermentation of sugars by aspergillus niger. gras (e330). most abundant organic acid in citrus.

SKIN COMPATIBILITY

Irritancy Rating: 1/5 – very low at low concentrations; 2/5 at exfoliant concentrations

Comedogenicity Rating: 0/5 – non-comedogenic

Sensitivity Concerns: Photosensitizing – mandatory spf use. start at low frequency.

Safe for Sensitive Skin: Use with caution – spf required

SAFETY & COMPATIBILITY

Safety Profile: Safe at otc concentrations. eu: ≤10% leave-on at ph ≥3.5. mandatory spf advisory.

Works Well With: Niacinamide,ceramides,hyaluronic acid,spf

Avoid Combining With: Retinol in same step; multiple exfoliants simultaneously

SCIENTIFIC NOTE

Three carboxylic acid groups provide multiple proton donation sites and stronger chelation than monocarboxylic ahas. this makes citric acid the preferred cosmetic chelating agent alongside edta.

Last Verified: Cosing database,cir safety assessment,ewg skin deep

Primary Sources: 2026-03-12

DESCRIPTION

What It Does: Boosts foam, enhances mildness, and conditions skin and hair when combined with primary surfactants.

Why It's Used: The standard foam booster and mildness enhancer in virtually all shampoos, body washes, and facial cleansers – provides synergistic mildness improvement with anionic surfactants.

How It Works: Amphoteric (zwitterionic) character provides positive charge interaction with hair keratin for antistatic conditioning. reduces irritation of co-formulated anionic surfactants via ionic complex formation. foam stabilization via bilayer reinforcement in foam lamellae.

Typically Found In: Shampoos,body washes,facial cleansers,baby products

TECHNICAL DETAILS

Primary Category: Functional ingredient – amphoteric surfactant

Secondary Functions: Skin conditioning

Application Areas:

Facial Skincare

Body Care

Hair Care

Beard Care

Color Cosmetics (Makeup)

Dietary/Oral Supplements

Typical Concentration Range: 2%–15%

SOURCING & ETHICS

Vegan Status: Yes – from coconut fatty acids and dimethylaminopropylamine

Halal Status: Yes

Source Notes: Commercially produced for cosmetic use. verify vegan/halal status with supplier.

SKIN COMPATIBILITY

Irritancy Rating: 1/5 – very low

Comedogenicity Rating: 0/5 – non-comedogenic

Sensitivity Concerns: Well-tolerated by most skin types.

Safe for Sensitive Skin: Yes

SAFETY & COMPATIBILITY

Safety Profile: Good safety profile at recommended concentrations. ewg score: 1–2.

Works Well With: Standard skincare actives

Avoid Combining With: No known significant incompatibilities

SCIENTIFIC NOTE

Capb's mildness-enhancing synergy with sls has a molecular mechanism: capb's positive imidazoline head group forms an ion pair complex with sls's anionic sulfate group, reducing sls's free monomer concentration (the irritation-causing species) without significantly reducing micelle-forming capacity (the cleansing species).

Last Verified: Cosing database,ananthapadmanabhan surfactant review,cir safety assessment

Primary Sources: 2026-03-12

DESCRIPTION

What It Does: Provides highly potent broad-spectrum preservation at very low concentrations in rinse-off formulations.

Why It's Used: Most potent cosmetic preservative — mit provides effective preservation at concentrations 10-100× lower than most other preservatives, enabling clean-label preservation at minimal ingredient load.

How It Works: Electrophilic isothiazolinone ring reacts with bacterial thiol enzymes (glutathione, coa-dependent enzymes) via michael addition for rapid kill. very potent — mic vs e. coli 0.06μg/ml (vs phenoxyethanol mic ~400μg/ml — 6000× more potent). rapidly biodegradable.

Typically Found In: Rinse-off shampoos,body washes,conditioners

TECHNICAL DETAILS

Primary Category: Functional ingredient – isothiazolinone preservative

Secondary Functions: Skin conditioning

Application Areas:

Facial Skincare

Body Care

Hair Care

Beard Care

Color Cosmetics (Makeup)

Dietary/Oral Supplements

Typical Concentration Range: 0.0015%–0.0015% (max 15ppm eu rinse-off)

SOURCING & ETHICS

Vegan Status: Yes – synthetic

Halal Status: Yes

Source Notes: Commercially produced for cosmetic use. verify vegan/halal status with supplier.

SKIN COMPATIBILITY

Irritancy Rating: 1/5 – very low

Comedogenicity Rating: 0/5 – non-comedogenic

Sensitivity Concerns: Well-tolerated by most skin types.

Safe for Sensitive Skin: Yes

SAFETY & COMPATIBILITY

Safety Profile: Eu regulation 2014/1298: mit banned from leave-on products. max 15ppm in rinse-off only. contact sensitiser — causes occupational dermatitis epidemic in hairdressers and consumers. sccs noted no safe level for leave-on. 2016 eu restriction driven by major sensitisation epidemic.

Works Well With: Standard skincare actives

Avoid Combining With: No known significant incompatibilities

SCIENTIFIC NOTE

Mit's sensitisation epidemic (2010-2015) is one of the most significant cosmetic safety events in modern dermatology: a dramatic increase in contact allergy patch test positive rates from <1% (2005) to 7% (2015) in the eu was directly traceable to the widespread introduction of mit in leave-on products. this epidemic prompted the fastest eu cosmetic regulatory action in history and demonstrates the critical importance of patch test surveillance in monitoring emerging cosmetic allergens.

Last Verified: Cosing database,eu regulation 2014/1298,yazar et al. mit sensitisation epidemic study

Primary Sources: 2026-03-12

DESCRIPTION

What It Does: Stabilises o/w emulsions by reducing interfacial tension, solubilises oils and fragrances in aqueous systems, and wets oil-phase components for improved formulation homogeneity.

Why It's Used: Peg emulsifiers are selected for their precise hlb, broad ph stability (unlike soap emulsifiers that lose function at acidic ph), and compatibility with both anionic and cationic co-ingredients in the formulation system.

How It Works: Peg chain length determines hlb: longer peg = higher hlb = more hydrophilic = better o/w emulsification. at the o/w interface, the peg chain extends into the water phase forming a hydrated steric barrier that prevents droplet coalescence. nonionic character provides ph-independent function across the full cosmetic ph range.

Typically Found In: Emulsions,fragrance solubilisation

TECHNICAL DETAILS

Primary Category: Active ingredient – cosmetic active

Secondary Functions: Skin conditioning

Application Areas:

Facial Skincare

Body Care

Hair Care

Beard Care

Color Cosmetics (Makeup)

Dietary/Oral Supplements

Typical Concentration Range: 1%–10%

SOURCING & ETHICS

Vegan Status: Yes

Halal Status: Yes

Source Notes: Commercially produced for cosmetic use. verify vegan/halal status with supplier.

SKIN COMPATIBILITY

Irritancy Rating: 1/5 – very low

Comedogenicity Rating: 0/5 – non-comedogenic

Sensitivity Concerns: Well-tolerated by most skin types.

Safe for Sensitive Skin: Yes

SAFETY & COMPATIBILITY

Safety Profile: Good safety profile at recommended concentrations. ewg score: 1–2.

Works Well With: Standard skincare actives

Avoid Combining With: No known significant incompatibilities

SCIENTIFIC NOTE

Mixed peg emulsifier systems (e.g., peg-100 stearate + glyceryl stearate) form more cohesive interfacial films than single emulsifiers — the geometric complementarity of the co-emulsifier pair providing better mechanical emulsion stability than either component alone.

Last Verified: Cosing database,peg-80 sorbitan laurate peg emulsifier review

Primary Sources: 2026-03-12

DESCRIPTION

What It Does: Solubilizes fragrance oils and other lipophilic ingredients into water-based formulations.

Why It's Used: Standard fragrance solubilizer for water-based formulations – the industry standard for incorporating oil-soluble fragrances and actives into aqueous systems without separate oil phase.

How It Works: Hlb ~16.7 provides strong solubilization capacity for oils in water. laurate (c12) chain provides milder skin interaction than higher-hlb polysorbates. polyoxyethylene chains (20 eo units) provide high water solubility. effective solubilizer at 3-4:1 polysorbate:fragrance ratio.

Typically Found In: Toners,micellar waters,fragrance-containing aqueous products

TECHNICAL DETAILS

Primary Category: Functional ingredient – sorbitan ester emulsifier/solubilizer

Secondary Functions: Skin conditioning

Application Areas:

Facial Skincare

Body Care

Hair Care

Beard Care

Color Cosmetics (Makeup)

Dietary/Oral Supplements

Typical Concentration Range: 0.5%–5%

SOURCING & ETHICS

Vegan Status: Conditional – sorbitol from plant, peg from petroleum

Halal Status: Yes

Source Notes: Commercially produced for cosmetic use. verify vegan/halal status with supplier.

SKIN COMPATIBILITY

Irritancy Rating: 1/5 – very low

Comedogenicity Rating: 0/5 – non-comedogenic

Sensitivity Concerns: Well-tolerated by most skin types.

Safe for Sensitive Skin: Yes

SAFETY & COMPATIBILITY

Safety Profile: Same peg 1,4-dioxane concern as all peg compounds. quality-grade ps-20 should be tested for impurities.

Works Well With: Standard skincare actives

Avoid Combining With: No known significant incompatibilities

SCIENTIFIC NOTE

Polysorbate 20's optimal solubilization ratio (3-4 parts ps-20 per part fragrance oil) is lower than expected from pure hlb theory. this efficiency arises from polysorbate's formation of very small, stable oil-in-water microemulsions (droplets <50nm) rather than conventional emulsions, providing optically clear, thermodynamically stable fragrance incorporation that conventional emulsifiers cannot achieve.

Last Verified: Cosing database,cir safety assessment

Primary Sources: 2026-03-12

DESCRIPTION

What It Does: Delivers characteristic cosmetic function at recommended use concentration.

Why It's Used: Selected for functional contribution and formulation compatibility supported by cosmetic science and regulatory safety data.

How It Works: Works through the mechanism of its molecular class as documented in peer-reviewed cosmetic literature.

Typically Found In: Skin care formulations

TECHNICAL DETAILS

Primary Category: Active ingredient – cosmetic active

Secondary Functions: Skin conditioning

Application Areas:

Facial Skincare

Body Care

Hair Care

Beard Care

Color Cosmetics (Makeup)

Dietary/Oral Supplements

Typical Concentration Range: 0.1%–10%

SOURCING & ETHICS

Vegan Status: Conditional

Halal Status: Yes

Source Notes: Commercially produced for cosmetic use. verify vegan/halal status with supplier.

SKIN COMPATIBILITY

Irritancy Rating: 1/5 – very low

Comedogenicity Rating: 0/5 – non-comedogenic

Sensitivity Concerns: Well-tolerated by most skin types.

Safe for Sensitive Skin: Yes

SAFETY & COMPATIBILITY

Safety Profile: Good safety profile at recommended concentrations. ewg score: 1–2.

Works Well With: Standard skincare actives

Avoid Combining With: No known significant incompatibilities

SCIENTIFIC NOTE

Sodium chloride has an established safety profile within the cosmetic regulatory framework at standard use concentrations.

Last Verified: Cosing database,sodium chloride technical literature

Primary Sources: 2026-03-12

DESCRIPTION

What It Does: Provides excellent foam and cleansing with significantly lower irritation than sls.

Why It's Used: The dominant primary surfactant in mainstream personal care – improved mildness over sls while retaining excellent foam and cleansing performance.

How It Works: Ethoxylation (2-3 eo units) inserts polyethylene oxide spacer between dodecyl chain and sulfate, sterically shielding sulfate from direct protein contact, reducing irritation vs sls. full micellar cleansing capacity retained.

Typically Found In: Shampoos,body washes,facial cleansers,household cleansers

TECHNICAL DETAILS

Primary Category: Functional ingredient – ethoxylated anionic surfactant

Secondary Functions: Skin conditioning

Application Areas:

Facial Skincare

Body Care

Hair Care

Beard Care

Color Cosmetics (Makeup)

Dietary/Oral Supplements

Typical Concentration Range: 2%–15%

SOURCING & ETHICS

Vegan Status: Yes – from coconut fatty acids

Halal Status: Yes

Source Notes: Ethoxylation process can generate trace 1,4-dioxane impurity – reputable manufacturers purify to <1ppm. look for sles certified with dioxane specification.

SKIN COMPATIBILITY

Irritancy Rating: 2/5 – low to moderate (significantly milder than sls)

Comedogenicity Rating: 0/5 – non-comedogenic

Sensitivity Concerns: Well-tolerated by most skin types.

Safe for Sensitive Skin: Yes

SAFETY & COMPATIBILITY

Safety Profile: Well-established safety. ewg score: 3 (1,4-dioxane impurity concern – use sles from ethoxylation with purification confirmation).

Works Well With: Standard skincare actives

Avoid Combining With: No known significant incompatibilities

SCIENTIFIC NOTE

Sles's reduced irritation vs sls directly correlates with the degree of ethoxylation – sles-2 (2 eo units) is milder than sls but not as mild as sles-3 (3 eo units). each ethylene oxide unit adds steric shielding around the sulfate group, progressively reducing its protein-binding and denaturation capacity.

Last Verified: Cosing database,ananthapadmanabhan et al. surfactant review,cir safety assessment

Primary Sources: 2026-03-12

DESCRIPTION

What It Does: Provides edta chelation in alkaline formulations where disodium edta has limited solubility.

Why It's Used: Alkaline-ph edta chelation for cleansers and alkaline formulations requiring metal sequestration beyond the solubility limit of disodium edta.

How It Works: Tetrasodium salt provides greater water solubility at alkaline ph vs disodium form (pka effects). same hexadentate chelation mechanism as disodium edta. preferred in alkaline cleansers (ph 7-10). identical chelation efficacy per mole vs disodium edta.

Typically Found In: Alkaline cleansers,high ph formulations,soap-based products

TECHNICAL DETAILS

Primary Category: Functional ingredient – chelating agent alkaline

Secondary Functions: Skin conditioning

Application Areas:

Facial Skincare

Body Care

Hair Care

Beard Care

Color Cosmetics (Makeup)

Dietary/Oral Supplements

Typical Concentration Range: 0.005%–0.1%

SOURCING & ETHICS

Vegan Status: Yes – synthetic

Halal Status: Yes

Source Notes: Commercially produced for cosmetic use. verify vegan/halal status with supplier.

SKIN COMPATIBILITY

Irritancy Rating: 1/5 – very low

Comedogenicity Rating: 0/5 – non-comedogenic

Sensitivity Concerns: Well-tolerated by most skin types.

Safe for Sensitive Skin: Yes

SAFETY & COMPATIBILITY

Safety Profile: Good safety profile at recommended concentrations. ewg score: 1–2.

Works Well With: Standard skincare actives

Avoid Combining With: No known significant incompatibilities

SCIENTIFIC NOTE

Tetrasodium edta's alkaline ph advantage reflects the ionisation state of edta carboxylate groups: at ph 7 disodium edta has two ionised carboxylates (fully soluble) and two protonated (affects solubility limit). tetrasodium edta's four sodium counterions provide four ionised carboxylates at all ph values — fully charged, fully soluble across the entire ph range.

Last Verified: Cosing database,cir safety assessment

Primary Sources: 2026-03-12